Clear Card - Let It Snow

These are all different versions of the same card. Again, they vary by the way the ribbon is added. These cards were made by cutting the acetate in half on the long side instead of the standard short side. And then I cut about 1 1/2" off the front flap. This particular card is stamped to open up rather than from the right. The images are from TAC stamp set T-870 and T-2924. The "Let It Snow" image is stamped using the Noire Palette Hybrid Ink Pad and heat set. It is colored from the backside of the transparency with a brown Sharpie (the trees). Glitter was also added from the backside to the snowflakes and snow hill outlines. White CS is attached to the back of the front flap using 2 green eyelets at the top. "Ready Set Snow" is stamped using Staz On White Ink. It is NOT embossed. The Green CS is attached to the front side of the back flap using double stick tape. The ribbon is thread through the eyelets on all but the last one.